Audient iD14 Review

Google+ Pinterest LinkedIn Tumblr +

We were mightily impressed by this fully-featured, reasonably-priced interface when we first saw it at Musikmesse. Huw Price takes a closer look…






Details
Price £190
Contact Audient 01256 381944
Web www.audient.com

sbtb

Audient is one of those companies that doesn’t believe audio quality should be compromised just because you may be buying an entry-level product. The iD14 may be about as stripped back as a hybrid audio interface/desktop controller can be, but the ASP8024 Class A microphone preamp circuit is the same as the one used in Audient’s consoles.

Each channel provides 56dB gain, with switches for phantom power, and the onboard digital converters employ Burr Brown technology. The 10dB boost and polarity switches are virtual rather than physical, and can be accessed through the iD software mixer – but more on that later.

In fact, the same preamps are fitted throughout Audient’s product range. They have benefitted from more than 18 years of development with designer David Dearden. There’s also a DI instrument input that uses JFET amplification – an old-school solid state technology that’s considered by many to share a lot of the sonic characteristics of audio valves.

The iD14 is pretty much a simplified and smaller version of the iD22. The features not included with the iD14 are switchable bass roll-off, cut switching and balanced inserts. There are two rather than four line outputs and total outputs are four rather than 14.

There is only one user-defined programmable function key, compared to the iD22’s three, and one cue mix rather than two. The converters in the iD14 have slightly less dynamic range.

However, the iD14 does have buss power and Scroll Control. Buss power means the iD14 can draw the juice it needs through the USB cable that’s used to connect the unit to your computer, but you can’t use phantom power. The Scroll Control feature works in conjunction with the iD App mixer software that is downloadable from Audient’s website.





The iD button on the iD14 itself corresponds to an iD icon in the iD App. When you click on the iD icon you get five options – Scroll Control, mono, mono plus polarity, dim and talkback. Scroll Control allows you to control parameters in your DAW using the main control knob on the iD14. Simply allow your mouse cursor to hover over the desired parameter and click the iD button in the iD14 itself.

Any adjustments you make can be written into your DAW automation in the usual way. We tried this in Logic, and Scroll Control does a fine job – once you get used to the feel of the manual control.

Alternatives
The Focusrite iTrack Solo (£86.54) is a two-channel USB interface for iPad and PC/MAC. It operates at 24-bit/96kHz and has two analogue inputs – one mic amp with phantom power and one instrument.

It ships with Ableton Live Lite 8 and Focusrite Scarlett Plug-in-Suite. Moving up-scale, the Arturia AudioFuse (£398) operates at 24-bit/192kHz, with 14 in and out channels – including two mic/line/instrument inputs. Other features include ADAT Iand S/PDIF I/O, wordclock I/O, MIDI I/O, three-port USB Hub, two headphone outs and built-in talkback microphone.

The mono plus polarity function is worth a mention, too. When activated, anything that’s dry and centrally panned virtually disappears and you’re left with reverbs, delays and all the other effects that have been applied. It can provide some interesting insights into the ways mixes are constructed.

A maximum of 10 inputs comprises two analogue and eight ADAT digital. Sample rates up to 96KHz are possible with four ADAT inputs, but it’s 48KHz maximum with eight. In addition, there are four analogue outputs.

Not so long ago, we reviewed the iD22 and the bottom line on the iD14 is that it sounds the same. Again, we configured a monitoring system where we could switch instantaneously between our regular interface and the iD14, and the difference in conversion quality was immediately evident.

With the iD14, the high frequencies were smoother and more refined, the bass was more solid and defined and the midrange was super clear and natural. Room ambience and reverb tails were easier to hear through the Audient, too.

Again, Audient preamps sound clean, transparent and classy. Noise levels are commendably low and we think they can hold their own with most mid-priced standalone solid state preamps. The DI is impressive, too.

With electric guitar, it produced a detailed and full-frequency tone with natural playing dynamics and no sterility.

Although it’s not the most fully featured desktop controller, the iD14 isn’t lacking anything essential, except perhaps a built-in talkback microphone. Audient has concentrated on audio quality rather than gimmicks and the result is attractive, sonically impressive and fiendishly useful.





Key Features
● 2 x Class-A Audient console mic preamplifiers
● High-performance Burr Brown AD/DA converters
● 1 x discrete JFET instrument input
● Main speaker output
● Independent Class-AB headphone output
● Full monitor control functionality (software controlled)
● ADAT input for expandability
● Low-latency -DSP mixer
● iD ScrollControl Mode
● All-metal enclosure
● USB2.0 Bus powered
● 24-bit/96khz

Share.

About Author

Comments are closed.